diff options
Diffstat (limited to 'layouts/community/ortho_4x12/drashna/config.h')
-rw-r--r-- | layouts/community/ortho_4x12/drashna/config.h | 153 |
1 files changed, 0 insertions, 153 deletions
diff --git a/layouts/community/ortho_4x12/drashna/config.h b/layouts/community/ortho_4x12/drashna/config.h deleted file mode 100644 index 7db0afa40f..0000000000 --- a/layouts/community/ortho_4x12/drashna/config.h +++ /dev/null @@ -1,153 +0,0 @@ -/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <[email protected]> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM) -# if defined(KEYBOARD_planck_light) -# define WS2812_DI_PIN A0 -# define RGBLED_NUM 13 // Number of LEDs -# endif -# define RGBLIGHT_HUE_STEP 12 -# define RGBLIGHT_SAT_STEP 12 -# define RGBLIGHT_VAL_STEP 12 -# define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 -# define RGBLIGHT_EFFECT_SNAKE_LENGTH 2 -# ifdef RGB_MATRIX_ENABLE -# define RGBLIGHT_DISABLE_KEYCODES -# endif -#endif // RGBLIGHT_ENABLE - -#ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) -// #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) -# define RGB_MATRIX_FRAMEBUFFER_EFFECTS -// #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 -# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended -# undef RGB_MATRIX_LED_PROCESS_LIMIT -# undef RGB_MATRIX_LED_FLUSH_LIMIT -# ifdef KEYBOARD_planck_rev6 -# define RGB_MATRIX_LED_COUNT RGBLED_NUM -# endif -#endif - -#if defined(KEYBOARD_lets_split_rev2) -# undef USE_I2C -# define EE_HANDS -#endif - -#if !defined(KEYBOARD_planck_light) -# ifdef RGBLIGHT_ENABLE -# define NO_MUSIC_MODE -# endif // RGBLIGHT_ENABLE -#else -# undef QMK_ESC_OUTPUT -# define QMK_ESC_OUTPUT E6 // usually COL -# undef QMK_ESC_INPUT -# define QMK_ESC_INPUT B0 // usually ROW -# undef QMK_LED -# define QMK_LED D6 -# undef QMK_SPEAKER -# define QMK_SPEAKER B5 -# define SOLENOID_PIN A1 -#endif // KEYBOARD_planck_light - -#if defined(KEYBOARD_planck) -# if defined(KEYBOARD_planck_light) -# undef PRODUCT -# define PRODUCT "Drashna Hacked RGB Beacon(Planck Light)" -# elif defined(KEYBOARD_planck_rev6) -# undef PRODUCT -# define PRODUCT "Drashna Hacked Planck Rev6" -# elif defined(KEYBOARD_planck_ez) -# undef PRODUCT -# define PRODUCT "Drashna Hacked Planck EZ" -# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095 -# endif -#endif -#undef NO_USB_STARTUP_CHECK - - -#define EEPROM_I2C_RM24C512C - -#define ENCODER_DIRECTION_FLIP -/* - * MIDI options - */ - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ - -// #define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 2 - -#define DRV2605L_FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ -#define DRV2605L_FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ -#define DRV2605L_FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ - -/* default 3V ERM vibration motor voltage and library*/ -#if DRV2605L_FB_ERM_LRA == 0 -# define DRV2605L_RATED_VOLTAGE 3 -# define DRV2605L_V_RMS 2.3 -# define DRV2605L_V_PEAK 3.30 -/* Library Selection */ -# define DRV2605L_LIBRARY 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ - -/* default 2V LRA voltage and library */ -#elif DRV2605L_FB_ERM_LRA == 1 -# define DRV2605L_RATED_VOLTAGE 2 -# define DRV2605L_V_RMS 2.0 -# define DRV2605L_V_PEAK 2.85 -# define DRV2605L_F_LRA 200 -/* Library Selection */ -# define DRV2605L_LIBRARY 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ - -#endif - -/* Control 1 register settings */ -#define DRV2605L_DRIVE_TIME 25 -#define DRV2605L_AC_COUPLE 0 -#define DRV2605L_STARTUP_BOOST 1 - -/* Control 2 Settings */ -#define DRV2605L_BIDIR_INPUT 1 -#define DRV2605L_BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ -#define DRV2605L_SAMPLE_TIME 3 -#define DRV2605L_BLANKING_TIME 1 -#define DRV2605L_IDISS_TIME 1 - -/* Control 3 settings */ -#define DRV2605L_NG_THRESH 2 -#define DRV2605L_ERM_OPEN_LOOP 1 -#define DRV2605L_SUPPLY_COMP_DIS 0 -#define DRV2605L_DATA_FORMAT_RTO 0 -#define DRV2605L_LRA_DRIVE_MODE 0 -#define DRV2605L_N_PWM_ANALOG 0 -#define DRV2605L_LRA_OPEN_LOOP 0 -/* Control 4 settings */ -#define DRV2605L_ZC_DET_TIME 0 -#define DRV2605L_AUTO_CAL_TIME 3 |