aboutsummaryrefslogtreecommitdiff
path: root/Demos
diff options
context:
space:
mode:
authorDean Camera <[email protected]>2010-09-24 06:45:11 +0000
committerDean Camera <[email protected]>2010-09-24 06:45:11 +0000
commitbd85422d2beb8b14e617839b7d05e7306df83edc (patch)
tree0f3d77d6edb3549fafa5a6e89aea371be0697251 /Demos
parentb48095c0fbd9774413702b0226ef72926034e6c6 (diff)
downloadqmk_firmware-bd85422d2beb8b14e617839b7d05e7306df83edc.tar.gz
qmk_firmware-bd85422d2beb8b14e617839b7d05e7306df83edc.zip
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target. Makefile whitespace fixes.
Diffstat (limited to 'Demos')
-rw-r--r--Demos/Device/ClassDriver/AudioInput/makefile6
-rw-r--r--Demos/Device/ClassDriver/AudioOutput/makefile6
-rw-r--r--Demos/Device/ClassDriver/DualVirtualSerial/makefile6
-rw-r--r--Demos/Device/ClassDriver/GenericHID/makefile6
-rw-r--r--Demos/Device/ClassDriver/Joystick/makefile6
-rw-r--r--Demos/Device/ClassDriver/Keyboard/makefile6
-rw-r--r--Demos/Device/ClassDriver/KeyboardMouse/makefile6
-rw-r--r--Demos/Device/ClassDriver/MIDI/makefile6
-rw-r--r--Demos/Device/ClassDriver/MassStorage/makefile6
-rw-r--r--Demos/Device/ClassDriver/MassStorageKeyboard/makefile6
-rw-r--r--Demos/Device/ClassDriver/Mouse/makefile6
-rw-r--r--Demos/Device/ClassDriver/RNDISEthernet/makefile6
-rw-r--r--Demos/Device/ClassDriver/VirtualSerial/makefile6
-rw-r--r--Demos/Device/ClassDriver/VirtualSerialMouse/makefile6
-rw-r--r--Demos/Device/Incomplete/Sideshow/makefile6
-rw-r--r--Demos/Device/Incomplete/TestAndMeasurement/makefile6
-rw-r--r--Demos/Device/LowLevel/AudioInput/makefile6
-rw-r--r--Demos/Device/LowLevel/AudioOutput/makefile6
-rw-r--r--Demos/Device/LowLevel/DualVirtualSerial/makefile6
-rw-r--r--Demos/Device/LowLevel/GenericHID/makefile6
-rw-r--r--Demos/Device/LowLevel/Joystick/makefile6
-rw-r--r--Demos/Device/LowLevel/Keyboard/makefile6
-rw-r--r--Demos/Device/LowLevel/KeyboardMouse/makefile6
-rw-r--r--Demos/Device/LowLevel/MIDI/makefile6
-rw-r--r--Demos/Device/LowLevel/MassStorage/makefile6
-rw-r--r--Demos/Device/LowLevel/Mouse/makefile6
-rw-r--r--Demos/Device/LowLevel/RNDISEthernet/makefile6
-rw-r--r--Demos/Device/LowLevel/VirtualSerial/makefile6
-rw-r--r--Demos/DualRole/ClassDriver/MouseHostDevice/makefile6
-rw-r--r--Demos/Host/ClassDriver/JoystickHostWithParser/makefile6
-rw-r--r--Demos/Host/ClassDriver/KeyboardHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/KeyboardHostWithParser/makefile6
-rw-r--r--Demos/Host/ClassDriver/MIDIHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/MassStorageHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/MouseHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/MouseHostWithParser/makefile6
-rw-r--r--Demos/Host/ClassDriver/PrinterHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/RNDISEthernetHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/StillImageHost/makefile6
-rw-r--r--Demos/Host/ClassDriver/VirtualSerialHost/makefile6
-rw-r--r--Demos/Host/Incomplete/BluetoothHost/makefile6
-rw-r--r--Demos/Host/LowLevel/GenericHIDHost/makefile6
-rw-r--r--Demos/Host/LowLevel/JoystickHostWithParser/makefile6
-rw-r--r--Demos/Host/LowLevel/KeyboardHost/makefile6
-rw-r--r--Demos/Host/LowLevel/KeyboardHostWithParser/makefile6
-rw-r--r--Demos/Host/LowLevel/MIDIHost/makefile6
-rw-r--r--Demos/Host/LowLevel/MassStorageHost/makefile6
-rw-r--r--Demos/Host/LowLevel/MouseHost/makefile6
-rw-r--r--Demos/Host/LowLevel/MouseHostWithParser/makefile6
-rw-r--r--Demos/Host/LowLevel/PrinterHost/makefile6
-rw-r--r--Demos/Host/LowLevel/RNDISEthernetHost/makefile6
-rw-r--r--Demos/Host/LowLevel/StillImageHost/makefile6
-rw-r--r--Demos/Host/LowLevel/VirtualSerialHost/makefile6
53 files changed, 159 insertions, 159 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile
index 86f34e6cec..470f83211e 100644
--- a/Demos/Device/ClassDriver/AudioInput/makefile
+++ b/Demos/Device/ClassDriver/AudioInput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -523,7 +523,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile
index e1b0dd81cf..8f2978b8a9 100644
--- a/Demos/Device/ClassDriver/AudioOutput/makefile
+++ b/Demos/Device/ClassDriver/AudioOutput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -525,7 +525,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -536,7 +536,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
index da7c7ca2fa..e270575e20 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile
index 8109121632..b2a80ea86e 100644
--- a/Demos/Device/ClassDriver/GenericHID/makefile
+++ b/Demos/Device/ClassDriver/GenericHID/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile
index 40ace20d1c..37431cd8eb 100644
--- a/Demos/Device/ClassDriver/Joystick/makefile
+++ b/Demos/Device/ClassDriver/Joystick/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile
index b392752c80..9fe72e23ec 100644
--- a/Demos/Device/ClassDriver/Keyboard/makefile
+++ b/Demos/Device/ClassDriver/Keyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile
index b7dbd1f639..115759ed85 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/makefile
+++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile
index 038f0446a9..e6aec7eb61 100644
--- a/Demos/Device/ClassDriver/MIDI/makefile
+++ b/Demos/Device/ClassDriver/MIDI/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile
index 390adaecbb..6ec34ec73c 100644
--- a/Demos/Device/ClassDriver/MassStorage/makefile
+++ b/Demos/Device/ClassDriver/MassStorage/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
index 154c3e1eec..bc1b9ce14e 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile
index c7cb09a330..306f2e6832 100644
--- a/Demos/Device/ClassDriver/Mouse/makefile
+++ b/Demos/Device/ClassDriver/Mouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile
index 59226883d5..758a77f829 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/makefile
+++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -540,7 +540,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -551,7 +551,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile
index 52a8cce587..d40208c39a 100644
--- a/Demos/Device/ClassDriver/VirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
index 240628d344..7e2bd6d49c 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile
index f62ffc7ff4..288188a89a 100644
--- a/Demos/Device/Incomplete/Sideshow/makefile
+++ b/Demos/Device/Incomplete/Sideshow/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -527,7 +527,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -538,7 +538,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile
index c7f41ebde5..7b2a5b102c 100644
--- a/Demos/Device/Incomplete/TestAndMeasurement/makefile
+++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile
index 86bc0948c5..3e4273a73d 100644
--- a/Demos/Device/LowLevel/AudioInput/makefile
+++ b/Demos/Device/LowLevel/AudioInput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -522,7 +522,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile
index bf189c309b..86bb0b7914 100644
--- a/Demos/Device/LowLevel/AudioOutput/makefile
+++ b/Demos/Device/LowLevel/AudioOutput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile
index fbd5d459ba..40b5a2c2fd 100644
--- a/Demos/Device/LowLevel/DualVirtualSerial/makefile
+++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile
index 9fa56a5507..be6da3c6b3 100644
--- a/Demos/Device/LowLevel/GenericHID/makefile
+++ b/Demos/Device/LowLevel/GenericHID/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile
index 553a89aee7..49697f7aba 100644
--- a/Demos/Device/LowLevel/Joystick/makefile
+++ b/Demos/Device/LowLevel/Joystick/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile
index a7fcdbb2c1..3794c50888 100644
--- a/Demos/Device/LowLevel/Keyboard/makefile
+++ b/Demos/Device/LowLevel/Keyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile
index d59329848f..dcd70e04b3 100644
--- a/Demos/Device/LowLevel/KeyboardMouse/makefile
+++ b/Demos/Device/LowLevel/KeyboardMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile
index 784709d4ae..45a8c06bea 100644
--- a/Demos/Device/LowLevel/MIDI/makefile
+++ b/Demos/Device/LowLevel/MIDI/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile
index 9f740fb3bf..b55334b926 100644
--- a/Demos/Device/LowLevel/MassStorage/makefile
+++ b/Demos/Device/LowLevel/MassStorage/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -523,7 +523,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile
index af82d9aafa..99467e769b 100644
--- a/Demos/Device/LowLevel/Mouse/makefile
+++ b/Demos/Device/LowLevel/Mouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile
index 0bb88470e2..ed17d36623 100644
--- a/Demos/Device/LowLevel/RNDISEthernet/makefile
+++ b/Demos/Device/LowLevel/RNDISEthernet/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -541,7 +541,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -552,7 +552,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile
index dacd22e8d4..89ad42ca46 100644
--- a/Demos/Device/LowLevel/VirtualSerial/makefile
+++ b/Demos/Device/LowLevel/VirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
index 9106172f2b..4dd8f9f7f2 100644
--- a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
+++ b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
index 44b3484472..fb7ceecaec 100644
--- a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/KeyboardHost/makefile b/Demos/Host/ClassDriver/KeyboardHost/makefile
index d3765b6f1a..fb6c11072d 100644
--- a/Demos/Host/ClassDriver/KeyboardHost/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
index 4c26502ee5..172137bf62 100644
--- a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/MIDIHost/makefile b/Demos/Host/ClassDriver/MIDIHost/makefile
index dfeabfbd8b..dc5811fb19 100644
--- a/Demos/Host/ClassDriver/MIDIHost/makefile
+++ b/Demos/Host/ClassDriver/MIDIHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/MassStorageHost/makefile b/Demos/Host/ClassDriver/MassStorageHost/makefile
index 4b33cb3dd2..f63a44882c 100644
--- a/Demos/Host/ClassDriver/MassStorageHost/makefile
+++ b/Demos/Host/ClassDriver/MassStorageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile
index 16e79eade2..5bd6b12e85 100644
--- a/Demos/Host/ClassDriver/MouseHost/makefile
+++ b/Demos/Host/ClassDriver/MouseHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
index c409796768..6ef2846fd6 100644
--- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/PrinterHost/makefile b/Demos/Host/ClassDriver/PrinterHost/makefile
index a4fa937b59..d0da5af9ec 100644
--- a/Demos/Host/ClassDriver/PrinterHost/makefile
+++ b/Demos/Host/ClassDriver/PrinterHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
index 2b33d174a8..f01f2f9fa3 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/StillImageHost/makefile b/Demos/Host/ClassDriver/StillImageHost/makefile
index 4069d91964..203e2cd73d 100644
--- a/Demos/Host/ClassDriver/StillImageHost/makefile
+++ b/Demos/Host/ClassDriver/StillImageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
index 27f813b3f9..47e9da17c6 100644
--- a/Demos/Host/ClassDriver/VirtualSerialHost/makefile
+++ b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -519,7 +519,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -530,7 +530,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile
index c65cd0f5f1..9dc804ac20 100644
--- a/Demos/Host/Incomplete/BluetoothHost/makefile
+++ b/Demos/Host/Incomplete/BluetoothHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -529,7 +529,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -540,7 +540,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile
index 1541d5a3ef..d82d5181c9 100644
--- a/Demos/Host/LowLevel/GenericHIDHost/makefile
+++ b/Demos/Host/LowLevel/GenericHIDHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
index 3f00103553..c44e69c49c 100644
--- a/Demos/Host/LowLevel/JoystickHostWithParser/makefile
+++ b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile
index 866d2120d8..b9d9f240aa 100644
--- a/Demos/Host/LowLevel/KeyboardHost/makefile
+++ b/Demos/Host/LowLevel/KeyboardHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
index 83abe71724..64516d44cb 100644
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/MIDIHost/makefile b/Demos/Host/LowLevel/MIDIHost/makefile
index eb040d06e5..3d73698761 100644
--- a/Demos/Host/LowLevel/MIDIHost/makefile
+++ b/Demos/Host/LowLevel/MIDIHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile
index f96868d8c1..220d71d621 100644
--- a/Demos/Host/LowLevel/MassStorageHost/makefile
+++ b/Demos/Host/LowLevel/MassStorageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -522,7 +522,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile
index b71f82e8d8..e7df96428e 100644
--- a/Demos/Host/LowLevel/MouseHost/makefile
+++ b/Demos/Host/LowLevel/MouseHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile
index ffe5f128f2..5fd2f9cf26 100644
--- a/Demos/Host/LowLevel/MouseHostWithParser/makefile
+++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile
index 65c7ff8fb0..93bb4ad5d5 100644
--- a/Demos/Host/LowLevel/PrinterHost/makefile
+++ b/Demos/Host/LowLevel/PrinterHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
index 3e899b3706..87b65f0da9 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/makefile
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile
index bd6ee27083..72d7707a4c 100644
--- a/Demos/Host/LowLevel/StillImageHost/makefile
+++ b/Demos/Host/LowLevel/StillImageHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile
index 584612d65b..935391ae68 100644
--- a/Demos/Host/LowLevel/VirtualSerialHost/makefile
+++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USBKEY
# Processor frequency.
@@ -520,7 +520,7 @@ flip: $(TARGET).hex
dfu: $(TARGET).hex
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
dfu-programmer $(MCU) reset
flip-ee: $(TARGET).hex $(TARGET).eep
@@ -531,7 +531,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
$(REMOVE) $(TARGET)eep.hex
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset